TM 11-6625-3060-24P
SECTION I
INTRODUCTION
1. Scope
NOTE
Cannibalization or salvage may be used as a
source of supply for any items source coded
This manual lists spares and repair parts; special tools;
above except those coded XA and aircraft
special test, measurement, and diagnostic equipment
support items as restricted by AR 750-1.
(TMDE), and other special support equipment required
for performance of organizational, direct support, and
(2) Maintenance code. Maintenance codes are
general support maintenance of the ME-526A/USM. It
assigned to indicate the levels of maintenance
authorizes the requisitioning and issue of spares and
authorized to USE and REPAIR support items. The
repair parts as indicated by the source and maintenance
maintenance codes are entered in the third and fourth
codes.
positions of the Uniform SMR Code format as follows:
(a) The maintenance code entered in the third
2. General
position will indicate the lowest maintenance level
authorized to remove, replace, and use the support item.
This Repair Parts and Special Tools List is divided into
The maintenance code entered in the third position will
the following sections:
indicate one of the following levels of maintenance:
a. Section II. Repair Parts List. A list of spares and
repair parts authorized for use in the performance of
Code
Application/Explanation
maintenance. The list also includes parts which must be
O - Support item is removed, replaced, used at the
removed for replacement of the authorized parts. Parts
organizational level.
lists are composed of functional groups in numeric se-
H - Support item is removed, replaced, used at the
quence, with the parts in each group listed in figure and
general support level.
item number sequence.
(b) The maintenance code entered in the fourth posi-
b. Section III. Special Tools List. A list of special
tion indicates whether the item is to be repaired and
tools, special TMDE, and other special support
identifies the lowest maintenance level with the capability
equipment
to perform complete repair (i.e., all authorized
authorized for the performance of maintenance.
maintenance functions). This position will contain one of
c. Section IV. National Stock Number and Part
the following maintenance codes:
Number Index. A list, in National item identification
number (NIIN) sequence, of all National stock numbers
Code
Application/Explanation
(NSN) appearing in the listings, followed by a list, in
Z - Nonreparable. No repair is authorized.
alphameric sequence, of all part numbers appearing in
(3) Recoverability code. Recoverability codes are
the listings. National stock numbers and part numbers
assigned to support items to indicate the disposition
are cross-referenced to each illustration figure and item
action on unserviceable items. The recoverability code is
number appearance.
entered in the fifth position of the Uniform SMR Code
format as follows:
3. Explanation of Columns
Recoverability
a. Illustration. This column is divided as follows:
codes
Definition
(1) Figure number. Indicates the figure number of
Z-
Nonreparable item. When unserviceable,
the illustration on which the item is shown.
condemn and dispose at the level indicated in
(2) Item number. The number used to identify item
position 3.
called out in the illustration.
c. National Stock Number. Indicates the National
b. Source, Maintenance, and Recoverability (SMR)
stock number assigned to the item and will be used for
Codes.
requisitioning purposes.
(1) Source code. Source codes indicate the manner of
d. Federal Supply Code for Manufacturer (FSCM).
acquiring support items for maintenance, repair, or
The FSCM is a 5,digit numeric code listed in SB 708-
overhaul of end items. Source codes are entered in the
41/42 which is used to identify the manufacturer,
first and second positions of the Uniform SMR Code
distributor, or Government agency, etc.
format as follows:
e. Part Number. Indicates the primary number used
by the manufacturer (individual, company, firm, corpora-
Code
Definition
tion, or Government activity), which controls the design
PA- Item procured and stocked for anticipated or
and characteristics of the item by means of its
known usage.
engineering
XD-A support item that is not stocked. When required,
item will be procured through normal supply channels
1
