TM 11-6625-2632-14
Code
Application/Explanation
d.Unit of Measure (U/M). Indicates the standard or basic
quantity by which the listed item is used in performing
L
-Repair.
restricted to designated Specialized
the actual maintenance function.
This measure is
Repair Activity.
expressed by a two-character alphabetical abbreviation;
Z
-Nonrepairable. No repair is authorized.
e.g., ea, in, pr, etc., and is the basis used to indicate
B
-No repair is authorized.
The item may be
quantities and allowances in subsequent columns.
reconditioned by adjusting, lubricating, etc., at
When the unit of measure differs from the unit of issue,
the user level. No parts or special tools are
the lowest unit of issue that will satisfy the required units
procured for the maintenance of this item.
of measure will be requisitioned.
e. Quantity Incorporated in Unit.
Indicates the
(3) Recoverability code. Recoverability codes
quantity of the item used in the breakout shown on the
are assigned to support items to indicate the disposition
illustration figure, which is prepared for a functional
group, subfunctional group, or an assembly.
action on unserviceable items. The recoverability code
is entered in the fifth position of the Uniform SMR Code
f. 15-Day Organizational Maintenance Allowances.
Format as follows:
(1) The repair parts indicated by an asterisk in
the allowance columns represent those authorized for
Code
Definition
use at the organizational category and will be
Z
-Nonrepairable item.
When unserviceable,
requisitioned on an "as required" basis until stockage is
condemn and dispose at the level indicated in
based on demand in accordance with AR 710-2.
position three.
(2) Major Army commanders are authorized to
O
-Repairable
item.
When
uneconomically
approve reduction in range of support items authorized
repairable,
condemn
and
dispose
at
for
use
in
units
within
the
commands.
organizational level.
Recommendations for increase range of items
F
-Repairable
item.
When
uneconomically
authorized for use will be forwarded to Commander, US
repairable, condemn and dispose at the direct
Army Electronic Command, ATTN: AMSEL-MA-A, Fort
support level.
Monmouth, NJ 07703.
Any changes approved will
H
-Repairable
item.
When
uneconomically
reflected in a revision to the RPSTL.
repairable, condemn and dispose at the general
(3) Allowance quantities are indicated the
support level.
Special Tools List section for special too TMDE, and
D
-Repairable item. When beyond lower level repair
other support equipment.
capability, return to depot. Condemnation and
g. 30-Day GS Maintenance Allowances .
disposal not authorized below depot level.
(1) The repair parts indicated by asterisk
L
-Repairable item.
Repair, condemnation, and
disposal not authorized below depot/Specialized
entries in separate allowance columns for GS represent
those authorized for use at that category of maintenance
Repair Activity level.
to be requisitioned on an "as required" basis.
A
-Item requires special handling or condemnation
procedures because of specific reasons (i.e.,
(2) Allowance quantities are indicated in the
precious metal content, high dollar value, critical
Special Tools List section for special tools, TMDE, and
material or hazardous material).
Refer to
other support equipment.
appropriate
manual/directive
for
specific
h. 1-Year Allowances Per 100 Equipments/
instructions.
Contingency Planning Purposes . Column intentionally
left blank.
b. Federal Stock Number. Indicates the Federal
i. Depot Maintenance Allowance Per 100
stock number assigned to the item and will be used for
Equipments.
This column indicates that the items
requisitioning purposes.
identified with an asterisk are authorized to be
requisitioned as required.
c. Description. Indicates the Federal item name
j. Illustration. This column is divided as follows:
and a minimum description required to identify the item.
(1) Figure number.
Indicates the figure
The last line indicates the reference number followed by
number of the illustration on which the item is shown.
the applicable Federal Supply Code for Manufacturer
(FSCM) in parentheses. The FSCM is used as an
element in item identification to designate manufacturer
or distributor or Government agency, etc., and is
identified in SB 708-42.
C-3
