TM 11-6625-2950-13
OPERATING INSTRUCTIONS
Section I.
S E R V I C E UPON RECEIPT OF MATERIEL
2-1. Service Upon Receipt of
Equipment
d. Refer to SB 38-100 for packaging material data.
e. Record the warranty date. The test set group is
a. inspect the equipment for damage incurred during
under warranty until that date which is annotated on the
shipment. If the equipment has been damaged, report the
warranty label.
2-2. Unpacking the Test Set Group
b. Check the equipment against the packing slip to
see if the shipment is complete. Report all discrepancies
a. Open the corrugated carton and fold back the top
flaps.
be placed in service even though a minor assembly or part
b. Remove the four corner pads.
that does not affect proper functioning is missing.
c. Remove the contents from the carton.
c. Check to see whether the equipment has been
d. O p e n t h e a i r t i g h t b a g a n d r e m o v e t h e i n n e r
modified. (Equipment which has been modified will have
corrugated carton,
the MWO number on the transit case.) Check also to see
e. Open the inner corrugated carton and remove the
w h e t h e r all currently applicable MWO's have been
contents.
applied. (Current MWO's applicable to the equipment
f. Remove the test set group from the cushioning and
are listed in DA Pam 310-7.)
inner wrapping material.
Test Set Group Packaging Diagram