SECTION I
INTRODUCTION
Code
Explanation
1-1. Scope
stocked only for subsequent or additional initial
This manual lists repair parts and special tools required
issues or outfittings. Not subject to automatic
for the performance of organizational maintenance of
replenishment.
the AN/ARM-71. The PCCN for the AN/ARM-71 is
PE - Support equipment procured and stocked for initial
GANABF for all models.
issue or outfitting to specified maintenance
repair activities.
1-2. General
PF - Support equipment which will not be stocked but
This repair parts and special tools list is divided into the
which will be centrally procured on demand.
following sections:
PG - Item procured and stocked to provide for sustained
a. Prescribed Load Allowance (PLA) -Section II.
support for the life of the equipment. It is
Not applicable.
applied to an item peculiar to the equipment
which because of probable discontinuance or
parts authorized for the performance of maintenance at
shutdown of production facilities would prove
the organizational level.
This repair parts list is
uneconomical to reproduce at a later time.
arranged in alphabetical order.
KD - An item of depot overhaul/repair kit and not
c. Special Tools, Test and Support Equipment -
purchased separately. Depot kit defined as a kit
Section IV. Not applicable.
that provides items required at the time of
d. Index-Federal Stock Number and Reference
overhaul or repair.
Number Cross-Reference to Figure and Item Number-
KF - An item of a maintenance kit and not purchased
separately. Maintenance kit defined as a kit that
all Federal stock numbers appearing in the listings,
provides an item that can be replaced at
followed by a list, in alphameric sequence, of all
organizational or direct support or general
reference numbers appearing in the listings. Federal
support levels of maintenance.
stock number and reference numbers are cross-
KB - Item included in both a depot overhaul/repair kit
referenced to each illustration figure and item number or
and a maintenance kit.
reference designation appearance.
MO - Item to be manufactured or fabricated at
organizational level.
1-3. Explanation of Columns
MF - Item to be manufactured or fabricated at direct
The following provides an explanation of columns in the
support maintenance level.
tabular lists:
MH - Item to be manufactured or fabricated at general
a. Source, Maintenance, and Recoverability Codes
support maintenance level.
(SMR).
MD - Item to be manufactured or fabricated at depot
(1) Source code. Indicates the manner of
maintenance level.
acquiring support items for maintenance, repair, or
AO - Item to be assembled at organizational level.
overhaul of end items. Source codes are:
AF - Item to be assembled at direct support
maintenance level.
Code
Explanation
AH - Item to be assembled at general support
PA - Item procured and stocked for anticipated or known
maintenance level.
usage.
AD - Item to be assembled at depot maintenance level.
PB - Item procured and stocked for insurance purposes
XA - Item is not procured or stocked because the
because essentiality dictates that a minimum
requirements for the item will result in the
quantity be available in the supply systems.
replacement of the next higher assembly.
PC - Item procured and stocked and which otherwise
XB - Item is not procured or stocked. If not available
would be coded PA except that it is deteriorative
through salvage, requisition.
in nature.
PD - Support item, excluding support equipment,
procured for initial issue or' outfitting and
2
