TM
11-6625-2709-40
b. Test Connections and Conditions. Remove the
OBS indicator from the test set. Disconnect P6 from
Physical Tests and Inspection.
the OBS indicator.
c. Procedure.
a. Equipment and Materials. Not
required.
(6) Fabricated cables.
ing Test.
b. Test Connections and Conditions. Remove all
a. Test Equipment and Materials.
power from the test set. In steps 1 and 2, connect the
(1) Modulator MD-83A/ARN.
equipment as shown in figure 4-7. In step 3, connect
indicator test set jack J2 to test set plug P2 using
(2) Meter Voltmeter ME-30(*)/U.
cable fabricated in paragraph 4-4 (fig. 4-2). In step 4,
apply power to test set and connect cable fabricated
(3) Resolver Test Set AN/ASM-101.
in paragraph 4-4 (fig. 4-3) to test set pendant cable
plugs P2 and P3.
(4) Course Indicator Test Set AN/ASM-110.
c. Procedure.
(5) Oscilloscope AN/USM-281A.
