TM 11-6625-622-12
and services chart (para 3-11) once each 3
3-9. Preservation
months (quarterly interval) in addition to the
Remove rust and corrosion from metal sur-
f a c e s by lightly sanding them with #000
tive maintenance checks and services. A quar-
sandpaper. Brush two thin coats of paint on
terly interval is defined as 90 calendar days of
the bare metal to protect it from further cor-
8-hour-per-day operation. All deficiencies or
rosion. Refer to the applicable cleaning and
shortcomings will be recorded, and those not
refinishing practices specified in TB Sig 3640.
corrected during the maintenance service and
inspection will be immediately reported to
higher level maintenance by the use of forms
Maintenance Checks
and procedures specified by TM 38-750. Equip-
and Services
ment with a deficiency that cannot be corrected
at the organizational level should be deadlined
Perform the maintenance functions indicated
in accordance with TM 38-750.
in the quarterly preventive maintenance checks
Seq
References
Procedure
Item
No.
See that the radio set test harness is complete.
1
Check to see that all pertinent publications are available.
2
Publications
The technical manuals must be complete and in usable
condition, without missing pages. All changes pertinent
to the publications must he on hand.
DA Pam 310-4.
Check to see that all URGENT MWO's have been applied
Modification work
3
to the equipment and that all NORMAL MWO's have
orders
b e e n scheduled.
