TM 11-6625-828-12
Figure 3-1. Test Set, Radio AN/ARM 5-A, controls and indicators..
(3) Stopping procedure (para 3-5).
3-2. Types of Operation.
a. Test Set, Radio AN/ARM-4A is a signal generator
which provides omni and amplitude localizer signals for
3-3. Starting Procedure
vhf navigational receiving equipment operating in the
Make sure that the initial adjustments described in
frequency range of 108 to 132 megacycles. It can be
used for bench testing and for radiated signal testing of
performing the starting procedure.
equipment installed in aircraft, either on the flight line or
a. Preliminary.. Set the SG-66B/ARM-5 front panel
in the air.
controls as follows:
b. For either type of operation, perform the following
a. Preliminary (cont).
procedures:
(1) Starting procedure (para 3-3).
(2) Operating procedure (para 3-4).
3-2
