TM 11-6625-2709-12
Procedure
Item
Seq no.
References
Equipment
Performance standard
Test procedure
control setting
c. Test lamp on the
4
TM 11-5826-2S34
Set the power switch
for Radio Receiving
aid box should light .
on the control unit
(cont)
Sets AN/ARN-82/
to TEST.
A\B.
d. The 1.0 FREQ
TM 11-5826-226-34
Set the megahertz
for Radio Receiving
selector on the
SELECT lamps on
Sets AN/ARN-82
the aid box should
control unit in 1-
A/B.
light in the combina-
MHZ steps from
tion listed in the
108.00 to 126.00
chart in paragraph
MHz
3-12.
TM 11-5826226-34
e. The 0.1 and .01
Use the kilohertz
for Radio Receiving
FREQ SELECT
selector on the
Sets AN/ARN-82
(MHz) lamps on the
control unit to set
A/B.
aid box should
the frequency in
light in the
0.05-MHz steps
combinations listed
from 108.00 to
in the chart in
108.95 MHz.
Set the power switch
on the control unit
to OFF.
Note
Connect the equipment a shown in the block diagram (fig. 2-8) for the following test.
g. Set the power switch
on the control unit
to PWR.
h. Set the IND TEST
switch on the test set
to GS.
i. Set the AUDIO
switch on the test
set to MB.
TM 11-5826226-34
26 VAC PWR LOC PWR, and
j. Set the FLAG LOAD
for Radio Receiving
switch on the test set
GS PWR lamps on the aid
to position 5.
box should light DEVIA-
Set AN/ARN-82 A/B.
TION meter should indi-
cate 75 10 microampere
to the right of 0. FLAG
meter should indicate
250 15 microampere.
k. Set the megahertz
The 1.0 FREQ
TM 11-5826-226-34
selector on the
for Radio Receiving
SELECT lamps on the aid
control unit in 1
box should light in the
Set ANARN-82 A/B.
MHz steps from
combination listed in
the chart in paragraph
108.00 to 126.00
MHz.
3-14.
l. Use the kilohertz
TM 11-5826-226-34
The 0.1 and .01
selector on the control
for Radio Receiving
FREQ SELECT lights on
unit to set the fre-
the aid box should light
Set AN/ARN-82 A/B.
in the combination
quency in 0.05 MHz
steps from 108.00 to
listed in the chart
108.95 MHz
3-8
Change 1
