TM 11-6625-2950-13
Technical
Test
Common
Used for
equipment
name
manual
Voltage and resistance
Voltmeter, Digital
TM-11-6625-444-15
measurements.
AN/GSM-64
---
Disassembly and reassembly
Tool Kit, Electronic
Tool Kit
Equipment TK-100G
of components of test set
group
Functional check of test
TM-11-5841-286-13
C-10547/ARC-164(V)
Uhf Radio
set group.
Control Box
Control
TM-11-6130-246-12
Providing regulated dc
Power Supply
Power Supply
power source.
PP-1104C/G
Monitoring waveforms.
Oscilloscope AN/
USM-281C
Refer to appendix E for a list of materials required for
direct support maintenance.
Section III. TROUBLESHOOTING
This section contains troubleshooting information for
each component of the test set group. Continuity checks
netting box. This procedure will check all the internal
and a trouble analysis flow diagram are provided to
wiring, functioning of the controls and indicators, and
supplement maintenance procedures.
operation of the relay, K1.
Control setting
Equipment
Test
Step
Performance standard
Test procedures
under test
no.
equipment
1
Check continuity be-
All Switches OFF
All meas-
tween the following
unless otherwise
urements
points (follow con-
specified.
made with
trol settings and
performance standards
set on
listed):
OHMS and
TO
FROM
RX100.
Continuity
J4M
J5A
CB1 DC ON
No continuity
J4M
J5A
CB2 AC OFF
Continuity
J4K
J5D
S5 ON
No continuity
J4K
J5D
S5 OFF
Continuity
J4E
J5D
S3 XMT KEY
100 to 200 ohms
J4E
J5D
S3 OFF
Continuity
J4E
J5D
S3 MOM ON
Continuity
J2R
J5D
S6-30 WATT
