TM 11-6625-333-15
INTRODUCTION
1-1. Scope
ME-MQ, Fort Monmouth, NJ 07703. We'll send you
a reply.
This manual describes Standing-Wave-Ratio
Power Meter ME-165/G (fig. 1-1) and covers
1-3.2. Administrative Storage
i n s t a l l a t i o n , operation, and maintenance instruc-
Administrative storage of equipment issued to and
tions. Appendix A contains a list of publications
used by Army activities shall be in accordance with
applicable to this manual and Appendix C
TM 740-90-1.
c o n t a i n s the maintenance allocation chart.
1-3.3. Destruction of Army Electronics
Materiel
a. DA Pam 310-4. Refer to the latest issue of DA
D e s t r u c t i o n of Army electronics materiel to pre-
P a m 310-4 to determine whether there are new
vent enemy use shall be in accordance with TM
editions, changes, or additional publications per-
750-244-2.
taining to the equipment.
b. DA Pam 310-7. Refer to DA Pam 310-7 to
d e t e r m i n e whether there are modification work
Power Meter ME-165/G
orders (MWO's) pertaining to the equipment.
a. The ME-165/G is used for measuring transmit-
ter output power and standing-wave-ratio; it may
Reports
also be used for terminating the transmitter
during radio silence operation.
a. Reports of Maintenance and Unsatisfactory
b. All components of the ME-165/G are mounted
E q u i p m e n t . Department of the Army forms and
on the front panel which fastens into a louvered
p r o c e d u r e s used for equipment maintenance will
case with 10 screws. The rear of the case has a
b e those described by TM 38-750, The Army
flange on top and a bracket on the bottom to permit
M a i n t e n a n c e Management System.
wall mounting (fig. 1-2).
b. Report of Packaging and Handling Deficien-
c. The unit is 13-1/2 inches by 9-5/8 inches by 9-5/8
cies. Fill out and forward DD Form 6 (Packaging
inches, and has a gray, smooth finish. A wingnut
I m p r o v e m e n t Report) as prescribed in AR 700-
on the bottom of the case secures a ground braid.
58/NAVSUPINST 4030.29/AFR 71-13/MCO
P4030.29A and DLAR 4145.8.
1-4.1. Component Comprising the Operable
c. Discrepancy in Shipment Report (DISREP)
End Item
( S F 361). Fill out and forward Discrepancy in
Standing Wave Ratio-Power Meter ME-165/G
Shipment Report (DISREP) (SF 361) as prescribed
(FSN 6625-682-4464) comprises the operable end
in AR 55-38/NAVSUPINST 4610.33B/AFR 75-18/
item.
MCO P4610.19C and DLAR 4500.15.
1-3.1. Reporting Equipment Improvement
Recommendations (EIR)
a. Standing-Wave-Ratio Power Meters ME-
165/G, procured on Order Numbers 3219-Phila.-59
If your Standing-Wave-Ratio Power Meter ME-
and 3241-Phila.-59, are similar in appearance,
165/G needs improvement, let us know. Send us an
operation, and purpose to those procured on
EIR. You, the user, are the only one who can tell us
previous orders. They differ only in some piece-
what you don't like about your equipment. Let us
part reference designations which are outlined in
know why you don't like the design. Tell us why a
the chart below:
procedure is hard to perform. Put it on an SF 368
NOTE
(Quality Deficiency Report). Mail it to Commander,
All reference designations not listed in
US Army Communications and Electronics
the chart are identical for all units.
M a t e r i e l Readiness Command, ATTN: DRSEL-
Change 2
