TM
11-6625-820-12
nections
for
testing
the
control
b. Bench Test Connections.
unit.
The
operating
procedures
to
(1)
Testing
the
receiver.
test
the
control
unit
are
contained
shows typical bench test connec-
in TM 11-5826-226-35 for Radio
tions for testing the receiver. The
Receiving
Sets AN/ARN-82 and
operating procedures to test
the
AN/ARN-82A.
receiver
are
contained in
TM
11-5826-266-35
for
Radio
Receiv-
ing
Sets AN/ARN-82 and AN/ARN-
Stopping Procedures
Test Set, Radio TS-2500/
82A.
ARM-92
can
only
be
used
to
test
Perform the following steps to remove the test
set from operation.
Radio Receiving Set AN/ARN-82.
a. Set the power switch on the control unit to
Test Set, Radio TS-2500A/ARM-92
can be used to test both Radio
OFF.
Sets AN/ARN-82 and
b. Disconnect the test set from the 27.5-volt
Receiving
AN/ARN-82A.
dc and 115-volt, 400-cps power sources.
(2) T e s t i n g t h e c o n t r o l u n i t .
c. D i s c o n n e c t t h e t e s t s e t c a b l e s f r o m a n y
2-5 shows typical bench test con-
external equipment.
TM6625-820-12-8
I
2-4.
Bench
test
connections
to
test
radio
Receiver
R-1388/ARN-82
or
R-1388A/ARN-82.
3
