TM 11-6625-2709-40
(4) Resistor color code. The resistor color code
a. Make test equipment connections with care so
diagram (figure 4-10) is provided to aid maintenance
that shorts will not be caused by exposed test equip-
personnel in determining the value and tolerance of
ment connectors. Tape or sleeve (spaghetti) test prods
resistors.
or clips as necessary to leave as little exposed metal as
needed to make contact to the circuit under test.
The following chart lists equipment required for
b. Observe polarity; a negative ground is required
troubleshooting Radio Test Set AN/ARM-92B. It also
on the 27.5-volt dc line. The low side of the ac line is
lists the associated technical manuals.
also grounded.
1
Indicates Output Meters TS-585A/U, TS-585B/U, and TS-585C/U, and Audio Level Meter TS-585D/U.
2
Indicates Multimeter ME-26A/U, ME-26B/U, and ME-26C/U.
3
Alternate, Oscilloscope AN/USM-140A.
4
Indictes Meter Voltmeter ME-30A/U and Electronic Voltmeters ME-30B/U and ME-30C/U.
