TM 11-6625-2709-40
V/L, the FLAG LOAD switch to position 5, and the
and Test Set
AUDIO switch to V/L. (All other switches and controls
may be set in any position.)
a. Perform the general support testing procedures for
e. Perform the procedures in the troubleshooting chart
the aid box in paragraph 4-7. If the general support testing
procedures indicate trouble, perform the troubleshooting
of paragraph 2-8. This chart gives various operational
procedures for the test set. The proper indication for each
procedures described in paragraph 2-5.
operational procedure is then given. If the equipment pro-
b. Connect the test set to the aid box and external
power as shown in figure 2-1.
duces an improper indication, the chart lists the probable
trouble and, in the Correction column, suggests how to
c. Set the power switch on the test set control unit to
isolate the trouble.
PWR.
d. Set the IND TEST switch on the test set to RCVR
Change 1
