TM 11-6625-2709-40
(7) Connect a 21.5-ohm, 1%, 1/2-watt resistor
ARM-92 Physical Tests and Inspection.
from binding post J5 to binding post J7.
Inspect unit for bent, damaged, or broken com-
(8) Connect the loose ends of the eight wires to
ponents and surfaces.
the binding posts as shown in figure 4-3.
a. Test Equipment and Materials. M u l t i m e t e r
ME-26(*)/U is required for the following procedure.
The performance standards listed in the tests (para
b. Test Connections and Conditions. Connect the
4-6 through 4-15) assume that the modification work
equipment as shown in A, figure 4-4. Refer to figure
orders, if any, have been performed. A listing of
1-2 for power connections.
current modification work orders will be found in DA
c. Procedure.
Pam 310-4.
Change 1
