C.
Procedure.
Equipment under test
Test procedures
Performance standard
Test equipment
Step
control settings
No.
control settings
a. No damage evident or parts
a. Inspect case, cover and chassis for:
Control may be in any position.
None.
1.
missing, All parts secure and
damage or missing parts, security
and serviceability of latches,
serviceable. External surf aces to
handle, and hinges, condition of
be painted will not show bare
paint.
metal. Panel lettering will be
legible.
NOTE
Touchup
painting
is
recommended in lieu of
refinishing whenever prac-
ticable; screwheads, binding
posts, receptacles, and other
plated parts will not be
painted or polished with
abrasives.
b. Screws, bolts, and nuts will be
b. Inspect all controls and mechanical
tight. None will be missing.
assemblies for loose or missing
screws, bolts, and nuts.
c. No loose or damaged parts. No
c. Inspect all connectors,
clips,
fuse holders, and
missing parts.
lamp holders,
cables for looseness, damage or
missing parts.
a. Controls will rotate freely without
a. Rotate
all panel
controls
Controls may be in any position.
2.
throughout their limits of
binding or excessive looseness.
rotation.
b. Operate all switches.
b. Switches will operate properly
without evidence of damage.
