NOTES:
1. IN SOME SETS L7302 HAS BEEN REMOVED AND
R7204 AND C7304 HAVE BEEN WIRED IN AS SHOWN.
2. IN SOME SETS C7304, R7304, AND THE .1 Of CAPACITOR
ARE CONNECTED AS SHOWN AND MOUNTED INSIDE THE
TEST SET CASE.
TM6625-496-45C1-1
3. UNLESS OTHERWISE INDICATED, RESISTANCES ARE IN OHMS.
Figure 5.1. Test probe RF preamplifier, showing changes in wiring of components.
13 Jan 64). Change the values of the following
Page 16, paragraph 26 (as changed by C 1, 13
resistors:
Jan 64) Make the following changes:
Subparagraph a, line 6. Change "'113" to:
R7911. From "22.1" to: 84.5.
66.5.
R7913. From" 113" to: 66.5.
Subparagraph b, line 7. Change "200" to:
R7914. From "200" to: 402.
402.
Page 65. Delete section II and substitute:
Page 22, paragraph 34, chart (as changed of C 1,
Section II. DEPOT INSPECTION STANDARDS
of Depot Inspection
caplicability
standards
The tests outlined in this section are designed
to measure the" performance capability of a re-
paired equipment. Equipment that is to be re-
turned to stock should meet the standards given
in these tests.
.
61. Applicable References
a. Technical Publications The following tech-
nical publications are applicable to this equip-
ment:
2